Eddy vs LIKK Technologies

Eddy vs LIKK: which leak detection system is right for your building?

LIKK and Eddy are close on paper: a wireless sensor network that reaches through concrete, automatic shutoff and a service model with no large upfront capex. The difference is the human layer. Eddy operators confirm and coordinate every event, and the program follows the building from construction into operations.

Why choose Eddy over LIKK

LIKK is a capable sensor-and-shutoff platform. Eddy adds the staffed response and the lifecycle around it.

Operators who call, not just automation

LIKK runs an automated detect-and-shutoff platform. Eddy adds a 24/7 monitoring center whose operators confirm the event, work the escalation list and stay on the line until the property team responds. A staffed water-incident center is not the same as an autonomous platform.

Construction through operations on one program

Eddy plans against the MEP drawings during fit-out and carries the same hardware and monitoring into occupancy. LIKK's deployments center on operating buildings.

Carrier-ready documentation

Every confirmed Eddy event closes with a Leak Incident Report built for carriers, with documented premium savings of up to 20%, with deductible reductions of up to 80% documented at individual properties.

Shutoff that scales to the mains

Eddy IQ integrates metering and shutoff on smaller lines, and Eddy Link drives motorized valves up to 18 inches on the larger lines, all provisioned and configured by Eddy.

Coverage map

Close on paper. The difference is the human layer.

LIKK pairs a sensor network with automatic shutoff. Eddy operators confirm and coordinate every event and call your team. Run a leak to see each step.

Cutaway model of an occupied mid-rise showing Eddy sensors in the suites and risers, meters and shutoff valves in the basement mechanical room, and the rooftop gateway linked through Eddy's cloud to the 24/7 monitoring centerCutaway model of an occupied mid-rise showing Eddy sensors in the suites and risers, meters and shutoff valves in the basement mechanical room, and the rooftop gateway linked through Eddy's cloud to the 24/7 monitoring center

Occupied building · Business hours

Drag to turn the building. Select a label, or run a leak through the system.

Interactive 3D section of an occupied mid-rise, from the domestic main in the basement to the suites, risers and rooftop mechanical. It shows where Eddy places its sensors, smart meters, shutoff valves and LoRaWAN gateway, and how alerts travel through Eddy's cloud to the 24/7 monitoring center.

The system

Detect, control and respond, in one managed program.

Sensors sit where leaks start and meters watch the flow. Valves close on the rules you set, and a 24/7 monitoring center follows each alert until your team has eyes on it.

3 layers and 16 close-ups in this building

Detect

Two ways to find a leak before it finds a unit.

Sensors sit where leaks start, and meters watch the flow for the leaks no sensor can reach.

8 close-ups · select one to zoom in

Point-of-leak

Flow-based

Control

Valves that close the water before it closes the unit.

Valves close on the rules you set, automatically on a threshold or remotely from the dashboard.

4 close-ups · select one to zoom in

Respond

A live monitoring center that closes the loop.

Alerts go through Eddy's cloud to a 24/7 monitoring center, and an operator calls your team until someone has eyes on the water.

4 close-ups · select one to zoom in

What happens in a leak, step by step
  1. A washing machine supply hose bursts in a suite upstairs.
  2. Eddy H2O under the washer detects water and sends the alert over LoRaWAN.
  3. The building's gateway relays it. Your team and the 24/7 monitoring center are alerted at the same time.
  4. A shutoff rule closes the suite's Eddy IQ valve. The water stops at the source.
  5. An operator confirms the alert and calls your on-site team through the escalation protocol.

Automatic shutoff is configured per building. Some sites use operator-coordinated isolation instead.

More about Respond

Eddy's 24/7 monitoring center confirms every alert, escalates per your contact list and stays on the line until the water is off and the on-site team has eyes on it.

  • Configurable automation rules per zone and time of day
  • Trained operators on duty 24/7
  • Escalation: automation → property manager → emergency contact, on your list
  • Submetering and consumption data for billing, conservation and ESG reporting

Behind each close-up

  • AUTOMATION: Configurable rules per zone & time-of-day · Eddy Dashboard
  • LIVE OPERATORS: Trained humans, every event · Monitoring center
  • ESCALATION: Per-contact-list escalation · Your team
  • SUBMETERING: Per-unit billing & conservation reporting · Eddy IQ

Eddy vs LIKK: feature by feature

The hardware models are close. Here is how the two compare on response, lifecycle, reporting and shutoff.

Monitoring and response

Eddy

In-house monitoring center staffed 24/7 by operators trained on water incidents who confirm the event and coordinate the response per the building runbook.

LIKK Technologies

Automated detection with multi-cycle verification and intelligent shutoff. A staffed live monitoring center is not publicly specified.

Why it matters: Automation closes the obvious events. A human closes the ambiguous ones and coordinates the response your team actually runs.

Connectivity

Eddy

LoRaWAN at 915 MHz, engineered for concrete cores and tall buildings.

LIKK Technologies

Proprietary network stack that operates independently of building Wi-Fi, designed to reach through concrete and steel.

Why it matters: Both are built to reach where Wi-Fi and cellular fail. This is a point of agreement.

Automatic shutoff

Eddy

Eddy IQ on smaller lines and Eddy Link driving valves up to 18 inches on larger lines, all provisioned and configured by Eddy.

LIKK Technologies

An intelligent shutoff module that integrates the sensor platform with multiple valves across the property.

Why it matters: Both stop the water. Eddy provisions and configures every valve and meter, so shutoff and metering run as one program.

Detection methods

Eddy

Eddy H2O 3-in-1 sensors plus inline flow metering on the mains and risers.

LIKK Technologies

LIKK H2O wireless sensors placed at high-risk locations, with verification cycles before alerting.

Why it matters: Point sensors and flow intelligence catch different failures. Carrying both matters.

Construction-to-operations coverage

Eddy

Same hardware and monitoring from fit-out through occupancy, with no second install at handover.

LIKK Technologies

Deployments center on operating buildings.

Why it matters: The most expensive leaks often happen during construction, before anyone is on site.

Insurance reporting

Eddy

Leak Incident Reports formatted for carriers, plus portfolio summaries and documented renewal outcomes.

LIKK Technologies

Risk-mitigation service framing. Carrier-formatted, per-incident reporting is not publicly detailed.

Why it matters: Renewals turn on a documented response chain a carrier can underwrite against.

Commercial model

Eddy

Managed service with a dedicated project manager and a Building Success Manager after go-live.

LIKK Technologies

Risk Mitigation as a Service, structured to avoid large upfront capex.

Why it matters: Both spread cost over time. Eddy pairs the service with named owners for the deployment.

Talk to a leak-detection advisor about your building

We will map your building's risk points and tailor a recommendation to your property type, construction stage and insurance requirements.

Talk to a leak-detection advisor

Getting started is easy

Detection alone is not loss prevention. Eddy connects detection, shutoff, monitoring and reporting in one place.

Build your system

Tell us about your building and get a customized leak protection recommendation in minutes.

Build your system

Talk to our team

Walk through the differences with a specialist who will tailor a recommendation to your property type, construction stage and insurance requirements.

Talk to a leak-detection advisor

FAQ

  • LIKK and Eddy look similar. What actually separates them?

    The hardware models are close: a wireless network that reaches through concrete, automatic shutoff and a service-based commercial model.

    Eddy adds a 24/7 monitoring center whose operators confirm and coordinate every event, plus construction-to-operations coverage and carrier-ready documentation. The human response layer and the lifecycle are the difference.

  • Does LIKK have a staffed monitoring center?

    LIKK markets an automated platform with multi-cycle verification and intelligent shutoff. A staffed live monitoring center is not publicly specified.

    Eddy operators join minutes after the alert, work the escalation list and stay on the event until the property team responds.

  • Is LIKK a good fit for some buildings?

    Yes. For operating multi-family and commercial buildings that want an automated detect-and-shutoff platform on an opex model, LIKK is a strong option.

    Eddy fits where the staffed response chain, construction-phase coverage and carrier documentation drive the program.

Get your property protected.

Peace of mind, on every floor: our specialists map your building's risk points and design coverage backed by a 24/7 monitoring center.

Chat
Let's talk leak detection