Real-time flow
Eddy IQ reads flow and volume minute by minute, accurate to a tenth of a liter, with no drift or pressure loss over time.
Eddy reads flow, consumption and risk from every meter and sensor in the building, then puts it in one dashboard. You see waste, anomalies and trends before they turn into a loss.




What Eddy reads
Visibility is the foundation of the program. Before Eddy can catch a leak or stop the water, it reads the building continuously and learns what normal looks like.
Eddy IQ reads flow and volume minute by minute, accurate to a tenth of a liter, with no drift or pressure loss over time.
Eddy Link reads the meters on mains, zones and risers, provisioned and configured by Eddy, so their flow and consumption data reach the same dashboard.
Eddy Dashboard and the My Eddy app put every building, floor and zone in one view, for as many users as the team needs.
From data to decisions
The dashboard is not a chart for its own sake. Each reading feeds a decision a property team, a finance lead or an insurer can act on.
Tour the Eddy DashboardSee where water goes across the portfolio and spot the slow waste that never trips an alarm but runs up the bill.
Unit-level metering supports consumption-based billing and qualifies for LEED credits.
Export the water and carbon data sustainability teams and lenders ask for, drawn from real readings, not estimates.
Flow patterns surface aging fixtures and at-risk equipment before they fail, so maintenance gets ahead of the problem.
Inside a Read deployment
Visibility is only as good as the points it covers. These are the meters and metering solutions Eddy puts on the building's water, each reporting to the same dashboard.
All-in-one flow meter and shutoff. Real-time volume accurate to 0.1 L/min, with no drift or pressure loss over time.
Reads the meters on the larger lines, provisioned and configured by Eddy.
Whole-building consumption, plus flow detection during the hours no one should be using water.
Tracks make-up water on hydronic loops, so a slow loss on the mechanical side shows up early.
Per-suite consumption for accurate tenant billing, with leak isolation built in. Qualifies for LEED credits.
Watches outdoor and irrigation lines for the irregular flow that quietly runs up a summer bill.
At portfolio scale
Numbers from the operating portfolio, drawn from the State of Water Risk '26 report and audited against carrier loss runs.
Real client deployments, real outcomes. Each story starts with a building that could finally see its own water.

Eddy deployed during construction at Luskin Conference Center, Weyburn Housing and the CHS Medical Facility, then continued through operations. Roof-drain monitoring at CHS helped UCLA defer a major roof replacement until funding was available.

Forty-seven anomalies investigated and thirty-nine confirmed leaks contained on PCL's monitored network. Eddy is now budgeted from the proposal stage on every PCL project.

FirstService Residential retrofitted Eddy across HVAC, risers, fixtures and common areas. Four leak events mitigated annually with $11K in estimated annual savings.

Comprehensive retrofit across HVAC, risers, sinks, toilets and common areas. Fourteen events mitigated annually with $41K in estimated operational savings.

Both Four Seasons Residences towers ran fifteen confirmed leak incidents through the Eddy monitoring program with two-to-seven minute response times. Zero major incidents, zero suite displacements.

Tenant-aware shutoff sequences let a single riser go down without closing floors. Operations gets the alert before the tenant does.
Next: Detect
Once Eddy sees the water, it catches the leaks, at the source and in seconds.
Peace of mind, on every floor: our specialists map your building's risk points and design coverage backed by a 24/7 monitoring center.
We use cookies to improve your experience and analyze traffic.